From 8081a5520a441b43a8a7a73f3a90c7aacfaa8e10 Mon Sep 17 00:00:00 2001 From: Timotej Lazar Date: Sun, 24 Feb 2019 21:05:27 +0100 Subject: Move everything one level up --- tasks/openvpn_simple_smb/howtos/en/index.html | 98 +++++++++++++++++++++++++++ 1 file changed, 98 insertions(+) create mode 100644 tasks/openvpn_simple_smb/howtos/en/index.html (limited to 'tasks/openvpn_simple_smb/howtos/en') diff --git a/tasks/openvpn_simple_smb/howtos/en/index.html b/tasks/openvpn_simple_smb/howtos/en/index.html new file mode 100644 index 0000000..aba834e --- /dev/null +++ b/tasks/openvpn_simple_smb/howtos/en/index.html @@ -0,0 +1,98 @@ + + + + + + + +OpenVPN and SMB task:
+

Quick task:

+ Connect to VPN with OpenVPN. Enable access to files through NFS and copy them through SMB.

Instructions:

+ 1. From Directory with images of virtual computers drag twice the picture SimpleArbiterVPN and VPNClient.
+ 2. With VirtualBox (or other programs for virtual computers) create two virtual computers and give them VPNCLient.vdi and SimpleArbiterVPN.vdi as disk for storage.
+ 3. On both set two network interface(NAT and Internal) and run them.
+ 4. On both VM login with username root and password kaboom .

First part: Set up OpenVPN on SimpleArbiterVPN and VPNClient.

Settings on the server:

+ 1. Download packages uml-utilities -> to adjust the virtual network interfaces and packet (openvpn). example: sudo apt-get install openvpn
+ 2. The new virtual network interface create with tunctl and specify IP with sudo ifconfig tap0 10.P.Q.R netmask 255.255.255.0
+ 3. Then generirate common key (you will share that key with client) with the command: openvpn --genkey --secret vpnkljuc.key
+ 4. On server set the configuration file tap0.conf, which should contain (split by lines) "dev tap0","proto tcp-server", "secret vpnkljuc.key"
+ 5. Run openvpn with openvpn --config /some_directory/somewhere/tap0.conf
+

Settings on the client:

+1., 2. steps are the same as the settings on the server
+3. Create configuration file tap0.conf, which should contain (split by lines) "remote IP_OF_YOUR_VPN_SERVR", "dev tap0", "proto tcp-client", "secret vpnkljuc.key"
+4. On OpenVPN server connect to openvpn --config /some_directory/somewhere/tap0.conf
+

+ +

Second part: Access to imenika /home/test/IME_IMENIKA over NFS

Client settings:

+ 1. Using "sudo apt-get install nfs-kernel-server" we install nfs service
+ 2. Create a directory /home/test/IME_IMENIKA
+ 3. To /etc/exports add line /home/test/bla IP_client + 4. Use sudo exportfs -a to save + 5. Restart service using "sudo service nfs-kernel-server start" +

Client settings:

+ 1. Instal client for nfs with command "sudo apt-get install nfs-common"
+ 2. Create mounting directory "sudo mkdir -p /mnt/nfs/home/test" and mount servers file "sudo mount IP_SERVER:/home/test"
+ 3. For automatic mounting we add previous commands to /etc/fstab
+ +

How-to za uporabo kpov-judge za OpenVPN

+ + + +

+howto: task_check(results, params): + Metoda dobi, kot prvi argument rezultat metode task(...), kot drugi pa + rezultat funkcije gen_params(). + + Vrne stevilo pridobljenih tock. + + +howto: task(...): + Metoda prejme naslednje argumente: + - IP naslov VPN streznika + - DNS naslov VPN streznika + - IP naslov klienta 1 + - DNS naslov klienta 1 + - IP naslov klienta 2 + - DNS naslov klienta 2 + + Vrne slovar rezultatov: + + results['SimpleArbiter_is_VPN_set_up'] + pove ali je VPN streznik nastavljen + + results['SimpleArbiter_is_VPN_running'] + pove ali je VPN streznik zagnan + + results['SimpleArbiter_ping_C1'] + ping rezultati (streznik -> klient1) + + results['SimpleArbiter_ping_C2'] + ping rezultati (streznik -> klient2) + + results['SimpleArbiter_nmap_results'] + pove ali sta oba klienta povezana na pravi VPN streznik + + results['SimpleArbiter_dir_vpn_contents'] + kljuc, ce se ta nahaja v ustreznem imeniku + + results['SimpleArbiter_nfs_access_control_list'] + preveri ce NFS dovoljuje dostop do /home/test/IME_UPORABNIKA + + results['VPNClient1_ping_VPN_server'] + ping rezultati (klient 1 -> strežnik) + + results['VPNClient2_ping_VPN_server'] + ping rezultati (klient 2 -> strežnik) + +

+ + + + + + -- cgit v1.2.1