smb_nfs

VirtualBox | Server | Client | NFS | Samba | DHCP

Quick guide

Set up two virtual computers - SimpleArbiterDhcp and FileServer.

Make sure that the directory /srv/nfs/ERLbbBrT on FileServer is accessible over NFS and over SMB under the sharename urania-03. Set the SMB server name to zarptica-32.

SimpleArbiterDhcp should have write access to /srv/nfs/ERLbbBrT over NFS.

Instructions

• Download these VM images:

  • student-fileserver.vdi
  • simpleArbiterDhcpGW.vdi
  
  

• VirtualBox Settings:

  • Enable PAE/NX for both VMs: Settings⇒System⇒Processor
  • For FileServer
    • Adapter 1 - NAT
    • Adapter 2 - Internal Network
  • For SimpleArbiterDhcp
    • Adapter 1 - Internal Network



• Server FileServer

  1. Set up a DHCP server
     1. apt-get update
     2. apt-get install isc-dhcp-server
     3. The server will not start (error Starting ISC DHCP server: dhcpdcheck syslog for diagnostics. ... failed!) , configure 3 files:
        • In /etc/network/interfaces set static IP for eth1 on which the DHCP server will be running, e.g.:

          auto eth1
          iface eth1 inet static
          address 192.168.1.10
          netmask 255.255.255.0
          network 192.168.1.0
          broadcast 192.168.1.255
          

        • In /etc/default/isc-dhcp-server:

          INTERFACES="eth1"

        • In /etc/dhcp/dhcpd.conf configure the subnet properties, e.g.:

          authoritative;
          default-lease-time 600;
          max-lease-time 7200;
          
          subnet 192.168.1.0 netmask 255.255.255.0 {
          range 192.168.1.100 192.168.1.200;
          option routers 192.168.1.10;
          option domain-name-servers 193.2.1.66, 8.8.4.4;
          
          host SimpleArbiter {
          hardware ethernet 08:00:27:A2:FB:B4;
          fixed-address 192.168.1.180;
          }
          }
          

  2. Set up a NFS server
     1. apt-get install nfs-kernel-server
     2. Determine the rules in /etc/exports, e.g.:

        /srv/nfs/ERLbbBrT 192.168.1.0/24(ro,sync,no_subtree_check)
        #privileges for SimpleArbiterDhcp
        /srv/nfs/ERLbbBrT 192.168.1.180(rw,sync,no_subtree_check)
        

  3. Set up SMB server
     1. apt-get install samba
     2. Create directory urania-03, npr.:

        mkdir /home/student/urania-03

     3. Edit configurations in /etc/samba/smb.conf, add at the bottom of document, e.g.:

        [zarptica-32]
        path = /home/student/urania-03
        available = yes
        valid users = tester
        read only = no
        browseable = yes
        public = yes
        writable = yes
        

     4. Restart Samba: service samba restart

     5. Test the syntax of smb.conf file with command testparam

     6. Add users:

        In order to define passwords for Samba users they have to exist as system users.

        Use command useradd USERNAME --shell /bin/false to create user with a disabled account and without home directory, e.g:

        useradd tester --shell /bin/false

        Define Samba password for your user:

        smbpasswd -a tester




• Client SimpleArbiterDhcp

  • NFS: run the command as root mount -t nfs nfs_server_ip:shared_dir dest , e.g.:

    mount -t -nfs 192.168.1.10:/srv/nfs/ERLbbBrT shared

  • SMB:
    1. Install Samba client as root:

       apt-get install sambclient
       

    2. Connect to SMB server::

       smbclient //192.168.1.10/zarptica-32 - U tester