HTMLize instructions and use jinja2 to render them

Only fixed tasks for the kpov_2018 class for now.

1 files changed, 33 insertions, 49 deletions

diff --git a/kpov_judge/tasks/isc_dhcp_live_boot/task.py b/kpov_judge/tasks/isc_dhcp_live_boot/task.py
index 38bbcd8..c1adc47 100644
--- a/kpov_judge/tasks/isc_dhcp_live_boot/task.py
+++ b/kpov_judge/tasks/isc_dhcp_live_boot/task.py
@@ -2,44 +2,40 @@
 # kpov_util should be imported by add_assignment.py
 
 instructions = {
-    'si':"""
-Postavi štiri navidezne računalnike - simpleArbiter, DHCP_server,
-BootableClientA ter BootableClientB.
-
-Na DHCP_server postavi DHCP strežnik s pomočjo ISC dhcp 3 na naslovu {IP_DHCP}.
-SimpleArbiter naj dobi {IP_GW}. DHCP_server naj ga uporabi kot gateway.
-
-Če se zaganja BootableClientB, naj se sistem zažene v datoteko z imenom {BOOT_FNAME}.
-Če se zaganja katerikoli drug, naj se sistem zažene z živega USB, ki ga predstavlja
-slika diska bootable_usb, ime datoteke z zagonskim nalagalnikom pa naj bo
-kakršno koli razen {BOOT_FNAME}.
-
-Živi USB priklopite na na DHCP_server ter z njega poberite datoteke, potrebne za zagon.
-Datoteke z nastavitvami za PXELinux, ki jih najdete na živem USB,
-MORAJO biti dostopne na korenskem imeniku strežnika TFTP.
-
-Tako BootableClientA kot BootableClientB naj bosta brez diskov.
-""", 
-    # TODO: write a proper translation. The one that used to be here was just wrong.
-    'en': """Set up 4 virtual computers - simpleArbiter, DHCP_server, 
-BootableClientA and BootableClientB.
-
-On DHCP_server, set up a DHCP server using ISC dhcp 3. Set the IP address of
-this server to {IP_DHCP}. If SimpleArbiter requests an IP, have the DHCP server
-serve it {IP_GW}. DHCP_server should use SimpleArbiter as it's gateway.
-
-If BootableClientB tries to boot over the network, have the DHCP server tell it 
-to boot from the file {BOOT_FNAME}. If any other system tries to boot over the
-network, have it boot from a live USB drive represented by the disk image
-bootable_usb and have the bootloader filename be different from {BOOT_FNAME}.
-
-Connect the live USB to DHCP_server and copy the files neccessarry for it to
-boot. The PXELinux configuration files must be the same as the ones found on
-the live USB and MUST be accessible on the TFTP server root.
-
-Both BootableCLientA and BootableClientB should be diskless.
-"""
+    'si': '''\
+<p>
+Postavi štiri navidezne računalnike: <em>simpleArbiter</em>, <em>DHCP_server</em>, <em>BootableClientA</em> in <em>BootableClientB</em>.
+
+<p>
+Na <em>DHCP_server</em> postavi strežnik DHCP s pomočjo ISC dhcp 3 na naslovu <code>{{IP_DHCP}}</code>. <em>SimpleArbiter</em> naj dobi <code>{{IP_GW}}</code>. <em>DHCP_server</em> naj ga uporabi kot privzeti prehod (angl. <em lang="en">gateway</em>).
+
+<p>
+Če se zaganja <em>BootableClientB</em>, naj se sistem zažene v datoteko z imenom <code>{{BOOT_FNAME}}</code>. Če se zaganja katerikoli drug, naj se sistem zažene z živega USB, ki ga predstavlja slika diska <code>bootable_usb</code>, ime datoteke z zagonskim nalagalnikom pa naj bo kakršno koli razen <code>{{BOOT_FNAME}}</code>.
+
+<p>
+Živi USB priklopite na na <em>DHCP_server</em> in z njega poberite datoteke, potrebne za zagon. Datoteke z nastavitvami za PXELinux, ki jih najdete na živem USB, <em>morajo</em> biti dostopne na korenskem imeniku strežnika TFTP.
+
+<p>
+Tako <em>BootableClientA</em> kot <em>BootableClientB</em> naj bosta brez diskov.
+''',
+    'en': '''\
+<p>
+Set up four virtual machines: <em>simpleArbiter</em>, <em>DHCP_server</em>, <em>BootableClientA</em> and <em>BootableClientB</em>.
+
+<p>
+On <em>DHCP_server</em>, set up a DHCP server using ISC dhcp 3. Set the IP address of this server to <code>{{IP_DHCP}}</code>. If <em>SimpleArbiter</em> requests an IP, have the DHCP server serve it <code>{{IP_GW}}</code>. <em>DHCP_server</em> should use <em>SimpleArbiter</em> as the gateway.
+
+<p>
+If <em>BootableClientB</em> tries to boot over the network, have the DHCP server tell it to boot from the file <code>{{BOOT_FNAME}}</code>. If any other system tries to boot over the network, have it boot from a live USB drive represented by the disk image <code>bootable_usb</code> and have the bootloader filename be different from <code>{{BOOT_FNAME}}</code>.
+
+<p>
+Connect the live USB to DHCP_server and copy the files neccessarry for it to boot. The PXELinux configuration files must be the same as the ones found on the live USB and <em>must</em> be accessible on the TFTP server root.
+
+<p>
+Both <em>BootableCLientA</em> and <em>BootableClientB</em> should be diskless.
+''',
 }
+
 computers = {
     'DHCPServer': {
         'disks': [
@@ -49,10 +45,6 @@ computers = {
                 'options':{'readonly': False},
                 'parts': [ {'dev': 'sdb1', 'path':'/mnt'} ],
             },
-            #{   'name': 'CDROM',
-            #    'options':{'readonly': True},
-            #    'parts': [],# no parts, no mounting.
-            #}
         ],
         'network_interfaces': [{'network': 'net1'}],
         'flavor': 'm1.tiny',
@@ -76,10 +68,6 @@ computers = {
         'disks': [
             {   'name': 'simpleArbiterGW',
             },
-            #{   'name': 'CDROM',
-            #    'options': {'readonly': True},
-            #    'parts': [{'dev': 'b1', 'path': '/cdrom'}],
-            #},
         ],
         'network_interfaces': [{'network': 'net1'}, {'network': 'test-net'}],
         'flavor': 'm1.tiny',
@@ -121,8 +109,6 @@ def task(IP_DHCP, IP_GW, MAC_BOOT, BOOT_FNAME):
     # could work (but you should test it)
     ip_str = pexpect.run('ip addr show')
     eth_re_str = r"ether (([0-9a-f]{{2}}:){{5}}[0-9a-f]{{2}})(.*)\r\n(.*){}(.*)\s(\w*)\r\n"
-    # print eth_re_str.format(IP_DHCP)
-    # print ip_str
     ip_re = re.search(eth_re_str.format(IP_GW), ip_str)
     mac_SA = ip_re.group(1)
     eth_dev_SA = ip_re.group(6)
@@ -162,7 +148,6 @@ def gen_params(user_id, params_meta):
     params['IP_DHCP'], params['IP_GW'] = kpov_util.IPv4_addr_gen(r, net, 2)
     params['BOOT_FNAME'] = kpov_util.fname_gen(r)
     params['TFTP_STRING'] = kpov_util.alnum_gen(r, 45) 
-    # IP_NM, DNS_NM, IP_static, DNS_static)
     return params
 
 def task_check(results, params):
@@ -209,7 +194,6 @@ def task_check(results, params):
     return score, hints
 
 def prepare_disks(templates, task_params, global_params):
-#    d = templates['simpleArbiterDhcp']
     d = templates['student-DHCPServer']
     s = """# {}""".format(task_params['TFTP_STRING'])
     d = templates['bootable_usb']